How To Become A Prosperous Dual Fuel Range Cooker With 13amp Plug Even If You're Not Business-Savvy

Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who appreciates the flexibility of gas cooktops but still requires an oven for baking? Discover a dual fuel range cooker that has the best of both worlds.

Many experienced home chefs favor gas cooktops for their superior temperature control and capacity to utilize sophisticated cooking techniques, such as grilling. These powerful stoves are expensive particularly if they need an extra gas connection and an electrician to install them.

What is a 13amp plug?

If you have a dual fuel range cooker (also known as a gas cooker and an electric oven), you will need an outlet with 13 amps. The plug will also have to be wired in the cooker circuit ring by a competent electrician.

This ensures the current flowing through the plug doesn't exceed the limit of safety, which could lead to an electrical fire. The current is controlled by a fuse in the plug. The fuse will blow as soon as it is overloaded. This protects the appliance against an overload of electricity.

The fuse is rated 13 amps, which is shown on top of the plug. This indicates the maximum amount of current that the plug could carry without damaging the appliance or causing heat to the socket. It is essential that when replacing fuses, you always use the same rated amperage as the original. If you replace the fuse with one of an alternative rating, you risk overheating the socket, and potentially putting yourself and others in serious risk.

Ceramic 13 amp fuse are extremely robust and are able to withstand extreme temperatures that can be generated by a range cooker. Ceramic elements are also resistant to fire and therefore a better choice over other kinds.

There are a variety of ways to install an 13 amp plug.  Ovens & Hobs  could be wired to an existing live socket. the flex is connected to it by a screw or plastic jaw type cord clamp. The clamp on the cord should be tightened after the plug is securely pushed into position.

Some plugs will include a wiring diagram on cardboard over the pins and these should be removed before connecting the wires. The wires must be trimmed to the proper length, as if they are too long, they could be crushed when plug covers are changed. The earth wire should be the longest to ensure that it is connected before the neutral and line pins.

How do I connect the 13amp plug?

The vast majority of dual cookers that use fuel in the UK are powered by an amp rating of 13 amps. This is vital because ovens can draw substantial current, while normal plug sockets have a rating of 10 amps.

In general new appliances must have a plug installed at the point of sale. This is to ensure compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances might not have a plug connected and this could be the reason for the issue.

The first thing to consider when connecting a cooker to an existing plug socket is to make sure that the fuse rating of the fuse box is similar to that of the plug. This is vital because a faulty fuse could be dangerous.

It is also recommended to check that the fuse has been completely seated into the cartridge, and that there isn't any movement. The next step is to prepare the flex to be used. Take off the sheathing and reveal the three conductors that are insulated. Utilize a utility knife to cut the sheathing beyond the grip on the cord at the point of entry into the plug. This won't penetrate the insulated conductors. The nick should be large enough to allow for the sheathing and cable to separate as the sheathing is pulled back. Finally, cut off the excess sheathing leaving about 40mm extending beyond the flexing end.

The flex is positioned over the plug, with the earth terminal at the top, and the neutral and live terminals at the bottom. Using the conductors with the colors to guide you to the right direction, the sheathing should be removed from each pin and the internal cable is then plugged to the appropriate terminal by using the cord grip. If the plug has a screw type cord clamp, loosen this and then pull back the insulation to reveal the copper conductors. Then, connect each insulated conductor to the appropriate terminal (starting with the earth before neutral, and then the live) by using the channel that they run through the plug.

What is the maximum draw of a 13 amp plug?

The maximum current draw for a 13amp plug at 300 volts is 3kw. This is a large amount of power, however the standard fuse in a UK plug won't fail until the cable reaches a hazardous temperature. A defective plug or socket can cause a fire therefore it is important to be vigilant about how much power you use particularly in the kitchen.

The fuses in plugtops are ceramic, approximately 25mm in length and rated for 240V mains. They will be marked with a BS kitemark or similar marking on the side and will contain sand. There are glass or plastic alternatives, however they should never be used with a live plug, unless you want to blow up the fuse and possibly be electrocuted!

Most dual fuel range cookers in the UK need to be hard-wired and cannot be plugged directly into a wall socket. They are usually connected via a dedicated cooker circuit, which is only suitable for appliances using up to 20 amps.

Check the ring circuit at your home with the fuse box, or call a local electrician. Ask whether the sockets are connected to the same ring, or if they are separate. They will also be able to tell you if there is an individual circuit that powers your oven.

If you're in the market for a new dual-fuel range cooker the size of your kitchen is an important aspect to take into consideration. We have a wide range of cookers that can be adapted to any space. Choose from compact 50-60cm dual fuel models, or the huge 90cm+ double ovens from top brands like Rangemaster and StovesAreUs.

We also have a broad range of multifunction gas and electric cookers. These multifunction cookers let you cook a variety of meals including casseroles, pasta and curries.

Explore our entire range of Cookers in Currys online or head in-store to take a look. We offer free installation at home and delivery on certain range cookers as well as flexible payments options. If you have any queries our team is available to assist - just drop us an email or give us a call. Credit is subject to status and terms and conditions apply.

What is the maximum draw of the switch on a cooker?

There is a lot of confusion about what the maximum current draw of a cooker's switch is. The reality is that the majority of cookers are not designed to connect to a standard socket, but instead are hard wired and fed into an oven ring circuit. This is due to the fact that they usually consume more than 20 amps when both the gas hob and electric oven are in use.

Therefore, you cannot find a dual range cooker with a fuel source that can be fitted to a standard socket, as this could create a serious fire risk and would be against electrical safety regulations. An experienced electrician will install any new electrical wiring to the kitchen cooker and will make sure that the total load (both the oven and the hob) will not exceed the capacity of supply of that circuit.

The benefits of a dual fuel range cooker include the responsive heating of a gas cooktop and the precise operation of an electric oven. This is why they are highly sought-after by chefs and home cooks alike. If you're looking to test different cooking techniques such as searing and grilling, a dual-fuel range cooker is the ideal choice.

When you are looking to purchase an appliance for your kitchen, you will need to consider a number of factors like size, performance and cost. You will also need a gas connection in your home to connect the appliance. If you're unsure then it's advisable to have a Gas Safe engineer inspect your property prior to installation.

The Currys range of dual fuel range cookers offers options to fit a variety of budgets, ranging from low-cost models from Indesit and Zanussi to our exclusive Essentials collection. If you are looking for something more sophisticated We have a range of top JennAir models, which feature many new features.

If you are buying a brand new dual fuel range cooker, it is important to check the owner's manual for specific details on the gas and electrical requirements. You will need to ensure that your home has a gas hook-up that is suitable and you may have to get a plumber to install it for you, if needed. Depending on your home, you will also need to ensure that you have a dedicated cooker ring circuit that is installed and signed off by a licensed electrician.